10 x 80 TCG +5 Hk .087 / .125" TS2000

• Triple Chip Grind (TCG) for ripping.
  
• Positive 5 degrees hook angle.
• For use on table saw machine.
• The 30mm bore option DOES include Universal Pinholes for machines such as Felder

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting in hard or soft woods. Use blades with more teeth when sawing thinner materials to provide quality cut and finish.  Triple chip grind are best used for cutting all types of abrasive materials such as chip board or dense laminates.  Note the TCG tooth form may cause chipping on bottom side of some laminates & veneers. Blades feature expansion slots with copper plugs to reduce noise, dissipate heat and attenuate vibration during the cutting process.